VEMD2500x01, vemd2520x01 www.vishay.com vishay semiconductors rev. 1.2, 18-oct-11 1 document number: 83294 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 silicon pin photodiode description VEMD2500x01 and vemd2520x01 are high speed and high sensitive pin photodiodes in a clear epoxy, miniature surface mount package (smd) with dome lens. the photo sensitive area of the chip is 0.23 mm 2 . features ? package type: surface mount ? package form: gw, rgw ? dimensions (l x w x h in mm): 2.3 x 2.3 x 2.8 ? aec-q101 qualified ? high radiant sensitivity ? suitable for visible and near infrared radiation ? fast response times ? angle of half sensitivity: ? = 15 ? package matched with ir emitter series vsmb2000x01 ? floor life: 4 weeks, msl 2a, acc. j-std-020 ? lead (pb)-free reflow soldering ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec note ** please see document vishay material category policy: www.vishay.com/doc?99902 applications ? high speed photo detector note ? test conditions see table basic characteristics note ? moq: minimum order quantity 16758-11 VEMD2500x01 vemd2520x01 product summary component i ra (a) ? (deg) 0.1 (nm) VEMD2500x01 12 15 350 to 1120 vemd2520x01 12 15 350 to 1120 ordering information ordering code packaging remarks package form VEMD2500x01 tape and reel moq: 6000 pc s, 6000 pcs/reel reverse gullwing vemd2520x01 tape and reel moq: 6000 pcs, 6000 pcs/reel gullwing absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit reverse voltage v r 60 v power dissipation t amb 25 c p v 215 mw junction temperature t j 100 c operating temperature range t amb - 40 to + 100 c storage temperature range t stg - 40 to + 100 c soldering temperature acc. reflow solder profile fig. 7 t sd 260 c thermal resistance junction /ambient acc. j-std-051 r thja 250 k/w
VEMD2500x01, vemd2520x01 www.vishay.com vishay semiconductors rev. 1.2, 18-oct-11 2 document number: 83294 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 basic characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - reverse dark current vs. ambient temperature fig. 2 - relative reverse light cu rrent vs. ambient temperature basic characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol min. typ. max. unit forward voltage i f = 50 ma v f 1v breakdown voltage i r = 100 a, e = 0 v (br) 32 v reverse dark current v r = 10 v, e = 0 i ro 110na diode capacitance v r = 0 v, f = 1 mhz, e = 0 c d 4pf v r = 5 v, f = 1 mhz, e = 0 c d 1.3 pf open circuit voltage e e = 1 mw/cm 2 , = 950 nm v o 350 mv temperature coefficient of v o e e = 1 mw/cm 2 , = 950 nm tk vo - 2.6 mv/k short circuit current e e = 1 mw/cm 2 , = 950 nm i k 11 a temperature coefficient of i k e e = 1 mw/cm 2 , = 950 nm tk ik 0.1 %/k reverse light current e e = 1 mw/cm 2 , = 950 nm, v r = 5 v i ra 8.5 12 17 a angle of half sensitivity ? 15 deg wavelength of peak sensitivity p 900 nm range of spectral bandwidth 0.1 350 to 1120 nm rise time v r = 10 v, r l = 1 k , = 820 nm t r 100 ns fall time v r = 10 v, r l = 1 k , = 820 nm t f 100 ns 20 1 10 100 1000 i ro - reverse dark current (na) t amb - ambient temperature (c) 94 8427 v r = 10 v 100 80 60 40 0.6 0.8 1.0 1.2 1.4 i ra, rel - relative reverse light current t amb - ambient temperature (c) 94 8416 v r = 5 v = 950 nm 0 100 80 60 40 20
VEMD2500x01, vemd2520x01 www.vishay.com vishay semiconductors rev. 1.2, 18-oct-11 3 document number: 83294 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 3 - reverse light current vs. irradiance fig. 4 - diode capacitance vs. reverse voltage fig. 5 - relative spectral sensitivity vs. wavelength fig. 6 - relative radiant sensitivity vs. angular displacement 0.1 1.0 10 100 0.01 i ra - reverse light current (a) e e - irradiance (mw/cm2) 16055 v ce = 5 v = 950 nm 10 1 0.1 0 2 4 6 8 0.1 c d - diode capacitance (pf) v r - reverse voltage (v) 94 8430 e = 0 f = 1 mhz 100 10 1 0 0.2 0.4 0.6 0.8 1.0 1.2 400 500 600 700 800 900 1000 1100 21553 - wavelength (nm) s ( ) rel - relative spectral sensitivity s rel - relative sensitivity 94 8248 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 0 0.2 0.4 ? - angular displacement
VEMD2500x01, vemd2520x01 www.vishay.com vishay semiconductors rev. 1.2, 18-oct-11 4 document number: 83294 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 reflow solder profile fig. 7 - lead (pb)-free reflow solder profile acc. j-std-020d drypack devices are packed in moisture barrier bags (mbb) to prevent the products from moisture absorption during transportation and storage. each bag contains a desiccant. floor life floor life (time between soldering and removing from mbb) must not exceed the time indicated on mbb label: floor life: 4 weeks conditions: t amb < 30 c, rh < 60 % moisture sensitivity leve l 2a, acc. to j-std-020. drying in case of moisture absorpti on devices should be baked before soldering. conditions see j-std-020 or label. devices taped on reel dry using recommended conditions 192 h at 40 c (+ 5 c), rh < 5 %. package dimensions in millimeters: VEMD2500x01 0 50 100 150 200 250 300 0 50 100 150 200 250 300 time (s) temperature (c) 240 c 245 c max. 260 c max. 120 s max. 100 s 217 c max. 30 s max. ramp up 3 c/s max. ramp down 6 c/s 19841 255 c 2.2 5.8 0.2 2.77 0.2 2.3 0.2 cathode 0.5 0.05 0.1 0.254 1.1 0.1 anode 0.4 2.2 0.19 0.3 1.6 0.4 z ? 1.8 0.1 2.3 0.2 s pecification s according to din technical drawing s not indicated tolerance s 0.1 drawing-no.: 6.544-5391.02-4 pin id expo s ed copper i ss ue: 2; 18.03.10 21517 0.75 6.7 1.7 ? 2.3 0.1 s older pad propo s al acc. ipc 7351 z 20:1
VEMD2500x01, vemd2520x01 www.vishay.com vishay semiconductors rev. 1.2, 18-oct-11 5 document number: 83294 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters: vemd2520x01 2.2 4.2 0.2 2.77 0.2 0.05 0.254 0.6 2.2 0.19 0.3 1.6 0.4 ? 1.8 specifications according to din technical drawings not indicated tolerances 0.1 drawing-no.: 6.544-5383.02-4 issue: 4; 18.03.10 exposed copper 0.75 2.45 5.15 solder pad proposal acc. ipc 7351 21488 x x 20:1 cathode anode 0.4 2.3 0.2 2.3 0.2 0.5 pin id
VEMD2500x01, vemd2520x01 www.vishay.com vishay semiconductors rev. 1.2, 18-oct-11 6 document number: 83294 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 taping and reel dimensions in millimeters: VEMD2500x01 issue: 2; 18.03.10 drawing-no.: 9.800-5100.01-4 leader and trailer tape: parts mounted empty (400 mm min.) empty (160 mm min.) direction of pulling out unreel direction ? 62 0.5 ? 330 1 reel 2 . 5 0.5 label posted here coming out from reel tape position x ? 1 3 0.5 12.4 1.5 x 2:1 i ii 6000 pcs/reel 12 0.3 5.5 0.05 1.75 0.1 2 0.05 4 0.1 4 0.1 ? 1.55 0.05 3.05 0.1 21572 technical drawings according to din specifications terminal position in tape devicce vemd2000 VEMD2500 cathode anode anode cathode vsmb2000 vsmg2000 vsmy2850rg vemt2000 vemt2500 collector emitter lead i lead ii
VEMD2500x01, vemd2520x01 www.vishay.com vishay semiconductors rev. 1.2, 18-oct-11 7 document number: 83294 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 taping and reel dimensions in millimeters: vemd2520x01 drawing-no.: 9.800-5091.01-4 leader and trailer tape: parts mounted empty (400 mm min.) empty (160 mm min.) direction of pulling out unreel direction ? 62 0.5 ? 330 1 reel 2 . 5 0.5 label posted here coming out from reel tape position x ? 13 0.5 12.4 1.5 x 2:1 i ii 6000 pcs/reel 12 0.3 5.5 0.05 1.75 0.1 2 0.05 4 0.1 4 0.1 ? 1.55 0.05 3.05 0.1 21571 technical drawings according to din specifications issue: 3; 18.03.10 terminal position in tape devicce vsmb2020 vsmg2020 cathode anode anode cathode vemd2020 vemd2520 vsmy2850g vemt2020 vemt2520 collector emitter lead i lead ii
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
